Call us: +86-18965139230 | Mail to us: info@jekare.com
The faucet is constructed with a solid brass body, using lead-compliant brass materials that meet the requirements of international export markets. A single lever handle enables users to manage both water flow and temperature with just one hand, while the high-precision ceramic cartridge is built to withstand over 500,000 operational cycles, significantly reducing the risk of leaks and lowering maintenance expenses over the product’s lifespan.
Designed for deck-mounted kitchen installations, this faucet works with standard single-hole sinks and comes equipped with stainless steel braided hot and cold water inlet hoses to ensure fast and easy setup. To cater to diverse market tastes, surface finishes are available in options like chrome, matte black, brushed nickel, brushed gold, gunmetal, and custom PVD coatings. Thread standards, connector specifications, logo engraving, packaging, and accessories can all be tailored to meet specific OEM and ODM project needs.
A 35mm high-purity alumina ceramic valve core is employed, featuring a ceramic sheet density of 99.7%. It is engineered for single-handle control logic in deck-mounted kitchen faucets, with sealing surface flatness maintained within 0.002mm to prevent cross-contamination of hot and cold water under fluctuating temperature conditions.
A food-grade silicone sealing ring surrounds the ceramic cartridge, capable of withstanding prolonged exposure to high-temperature hot water. When water is continuously output at 85°C, no unpleasant odor is released.
Prior to installation, each batch of ceramic cartridges undergoes 500,000 open-close cycle fatigue tests, replicating 15 years of daily household usage. After completing the full cycle, no water leakage or sticking issues are observed.
An alternating hot-cold temperature impact test cycles water between 10°C and 80°C for 240 consecutive hours, confirming a zero failure rate for the matched brass kitchen faucet valve core assembly.
Precision grinding of the ceramic contact surfaces reduces the friction coefficient during handle rotation to 0.08. Lifting and rotating the single handle requires only 2.5N of force, making operation effortless for frequent use in the kitchen.
A built-in silent damping mechanism within the cartridge eliminates abnormal friction noise during hot and cold water mixing adjustments. Operating noise is kept below 32 decibels, preventing any disruption from kitchen sounds.
An anti-wear layer on the ceramic sheets effectively resists scaling and fine sediment erosion from tap water, extending the cartridge’s lifespan by 60% compared to standard plastic valve cores used in deck-mounted single-handle faucets.
A pressure cycling durability test subjects the unit to water pressure ranging from 0.05MPa to 0.8MPa over 100,000 cycles. The valve core sealing performance remains stable, showing no signs of aging or deformation.
Acceptance of H59 lead-free brass ingots, spectral analysis of metal composition, and approved materials are sent to the high-temperature precision casting workshop to form the faucet body blank.
CNC lathes process the internal flow channels and installation threads of the brass blank, removing casting burrs to ensure smooth water flow inside the single-handle kitchen faucet.
Three steps—coarse grinding, fine grinding, and mirror polishing—are applied to the brass faucet surface, reducing surface roughness to Ra ≤ 0.8 μm to guarantee proper adhesion of the electroplating layer.
An automated closed-loop electroplating line applies three layers of nickel plus one layer of chrome, with constant-temperature bath control to maintain a uniform coating thickness of 8–12 μm on the deck-mounted brass faucet.
At a standardized assembly station, a 35 mm ceramic cartridge, single-lever handle, rotating spout, flow-limiting aerator, and deck-mounted base sealing parts are installed.
Static pressure tests, hot and cold water flow tests, switch endurance tests, and salt spray sampling inspections are conducted to eliminate non-conforming single-handle brass kitchen faucets.
A manual visual check identifies scratches, discoloration, and assembly gaps; defective units are sent back for re-polishing and re-plating.
Each deck-mounted kitchen faucet is wrapped in anti-scratch PE film, placed inside a foam liner for shockproof protection, and packed with complete installation accessories and a specification manual into a dedicated color box.
Twelve color boxes are packed into an export-grade five-layer corrugated carton, labeled with a batch tag containing the production date, certification code, and order number for supply chain traceability.
Finished cartons are stored in the finished goods warehouse by category, then arranged for container loading and sea or land transportation according to the buyer's designated port and delivery schedule.
Each batch of H59 brass bar stock is accompanied by a composition analysis certificate, with lead content strictly maintained below 0.25% to comply with global drinking water safety requirements. Materials showing inconsistent metal density are immediately rejected and returned to the supplier.
Following casting and polishing of the brass faucet body, every unit undergoes a 60-second sealing test at 0.6MPa air pressure. Products exhibiting a pressure drop exceeding 0.02MPa are marked as defective and sent for rework.
A random sample of 5% from each production batch undergoes a 480-hour neutral salt spray corrosion test. Plating adhesion is assessed using the cross-cut method, with no peeling or blistering permitted on the deck-mounted faucet surface.
Every unit is fully inspected for single-handle temperature regulation, water flow stability, and cartridge sealing performance. The hot and cold water switching function is verified by simulating an actual kitchen deck installation setup.
The fully packaged faucet is subjected to a vertical drop from 1.2 meters onto a hard surface. No deformation of the brass main body or damage to the internal ceramic cartridge assembly is allowed.
Hardware for new residential real estate kitchen setups, replacement of countertops in family-owned kitchens, and custom integrated sinks paired with single-handle brass faucets for villas.
Deck-mounted water supply equipment for kitchen areas in budget hotels, serviced apartments, and short-term rental properties; hot and cold water fixtures for small catering kitchens and staff canteens.
Bulk supply for global sanitary ware distributors, building materials retailers, and kitchen cabinet brands as supporting accessories; standard stock items for cross-border e-commerce home hardware.
Pantry sinks for small commercial offices, kitchen fixtures for school staff lounges, standardized faucet matching for bulk orders in apartment renovations, and sanitary hardware procurement for overseas construction projects.
The main structure is made of premium solid brass, offering outstanding resistance to corrosion and a long lifespan. Multiple surface treatments are offered to meet different market needs.
Yes. We offer logo engraving, custom colors, packaging, user manuals, labels, accessories, and full OEM/ODM product development tailored to international brand requirements.
The faucet features a high-precision ceramic cartridge designed to endure more than 500,000 usage cycles, ensuring smooth operation and dependable sealing performance.
Available finishes include Chrome, Matte Black, Brushed Nickel, Brushed Gold, Gunmetal, White, and custom PVD finishes based on project specifications.
Every faucet undergoes 100% inspection for leaks, pressure functionality, overall performance, visual appearance, coating integrity, and packaging quality prior to leaving the factory.
Yes. Inlet hoses, mounting components, thread specifications, packaging formats, manuals, and accessories are all adjustable to align with destination market regulations.
