Call us: +86-18965139230 | Mail to us: info@jekare.com
This custom 2.5 GPM multi function shower head is an OEM-ready ABS handheld with a polished chrome handle, a white matte faceplate, and soft silicone or TPR nozzles that wipe clean by hand. A face-edge lever selects full spray, center massage, or mixed spray, and the curved, tapered handle gives a secure grip in wet conditions. Typical flow is 2.1–2.4 GPM at 0.3 MPa, with a flow limiter option to hold the 2.5 GPM maximum or a lower target. Head size is about 110–120 mm, with a G1/2″ connection. Finish, face color, nozzle layout, logo, and packaging can be customized for private-label and retail programs.
Custom 2.5 GPM multi function shower heads are a core item for brands and importers that sell into water-regulated markets. They have to feel good in the hand, switch cleanly, and stay within the flow limit. This model pairs a curved, tapered chrome handle with a white matte faceplate, soft easy-clean nozzles, and a face-edge lever that moves between full spray, center massage, and mixed spray.
We build this multi function handheld shower head as a complete OEM/ODM program. That covers ABS tooling, electroplating, soft nozzle fitting, switching-mechanism assembly, and in-house flow and leakage testing. Face color, spray layout, flow limiting, thread type, logo, and packaging can all be set to your specification, so the product slots into your line without a redesign.
For sourcing teams, the value is a controlled flow platform. The head runs at a typical 2.1–2.4 GPM at standard test pressure, and the flow control can be sized to hold the 2.5 GPM maximum or a lower target such as 2.0 GPM. RoHS and REACH documents are available, and cUPC and WaterSense projects are supported on request. Send us your target market, finish, and flow requirement, and we will recommend a development path with samples.
JEKARE optimizes multi-functional high-pressure shower heads to deliver a strong, well-defined spray experience while remaining within the 2.5 GPM flow limit. Flow limiters or regulators can be configured to the required target, including lower-flow options such as 2.0 GPM, while nozzle diameter, nozzle quantity, and spray plate geometry are tuned for each spray mode to maintain effective spray performance. Separate flow chambers help create clear distinctions between full-spray and massage modes, while matched diverter components, seals, and lever travel support smooth and reliable mode switching through repeated operation. For hard-water markets, wipe-clean soft nozzles help reduce mineral buildup and clogging-related complaints.
Connection specifications can be adapted to market requirements, including G1/2" and U.S. 1/2" connections, with compatible sealing components. The platform can also be extended through customized face colors, black multifunction shower head variants, or new face shapes such as square configurations, with new tooling developed where required. For broader product programs, the shower head can be integrated as the handheld component of a multifunction shower system or dual shower head set.
We check wall thickness, flow path, nozzle layout, and lever clearance before molds are released.
Handle halves, faceplate, and spray plate are molded, with inspection of sealing surfaces and weld lines.
Pre-treatment and multi-layer plating are followed by appearance inspection of the handle and outer ring.
Silicone or TPR nozzles are pressed in and checked for seating and clear flow holes.
Seals, diverter, flow limiter, and lever are assembled, then tested for switching feel and leakage.
Samples from each batch go through flow and function checks. Appearance and packing are checked against the approved sample.
A structured quality testing program is used to verify flow compliance, sealing performance, switching durability, spray consistency, surface protection, and connection strength. Test parameters are established according to the target market, applicable requirements, and customer specifications.
Together, these controls provide measurable verification of hydraulic performance, mechanical reliability, finish durability, and production consistency before bulk shipment.
The typical flow is 2.1–2.4 GPM at 0.3 MPa. For a market that specifies a different test pressure, we size the flow limiter and confirm the result on samples at that pressure before you approve production.
Yes. WaterSense requires 2.0 GPM or less, and we can set the flow limiter to that target. The certification itself is a separate lab project, and we provide samples and technical support.
Face color, finish, and logo are routine changes. Changing the number of modes or the nozzle layout means revising the spray plate and diverter, which we review during DFM.
Spray force comes from nozzle diameter, nozzle count, and flow-chamber design. We tune these for each mode and test them against your approved sample. We cannot raise supply pressure, but we can make the available flow feel stronger.
We provide RoHS and REACH documents, a spec sheet, and test items for your target market. Samples are available for flow, switching, and finish approval.
The standard connection is G1/2". We can match the thread standard to your market, including the U.S. 1/2" connection, and confirm sealing on the actual hose.
